Quickly Fix Chipped Paint On Your Infiniti M35x Awd

If you're an Infiniti M35x AWD owner, you likely take pride in your car. However, paint chips and scratches are inevitable and can be unsightly. Luckily, there are several ways to fix this issue and restore your car to its former glory. You can purchase an Infiniti Touch Up Paint kit, which is easy to apply and provides excellent results. Alternatively, you could use a paint pen, such as the ColorChip Automotive Paint Chip Repair Kit, which has received good reviews. To prevent future paint chips, consider using a clear bra or other similar products to protect your car from road debris. With these solutions, you can keep your Infiniti M35x AWD looking its best.

How to fix chipped paint on Infiniti M35x AWD

Use a paint chip repair kit

To fix chipped paint on your Infiniti M35x, you can use a paint chip repair kit. These kits are designed to help you repair scratches and chips on your car's exterior. Here's a step-by-step guide on how to use a paint chip repair kit:

Step 1: Clean the Area

Start by cleaning the area around the paint chip with a gentle soap and water solution. Remove any wax or grease build-up using a wax and grease remover. Ensure the area is completely clean and dry before proceeding.

Step 2: Prepare the Surface

If the chip has exposed the unpainted surface, you will need to apply a primer. Primer helps the touch-up paint adhere to the surface and ensures a longer-lasting repair. Apply a small amount of primer to the chip, filling it up to the surrounding edges. Let the primer dry for at least 30 minutes.

Step 3: Apply Touch-Up Paint

Once the primer is dry, it's time to apply the touch-up paint. Choose a touch-up paint that matches your car's color as closely as possible. You can use a touch-up paint pen, brush, or spray paint, depending on the size of the chip and the type of paint (non-metallic or metallic). Apply a small amount of paint over the primer, following the directions provided with your paint chip repair kit.

Step 4: Allow the Paint to Dry

Let the touch-up paint dry completely before applying a second coat. Refer to the instructions on your paint kit for the recommended drying time between coats.

Step 5: Seal and Polish

After the final coat of paint has dried, apply a clearcoat to seal the repaired area. Apply several coats of clearcoat, allowing each coat to dry before applying the next. Once the clearcoat is dry, use a rubbing compound to smooth out the surface, followed by a polishing compound to restore the shine and gloss.

By following these steps and using a paint chip repair kit, you can easily fix chipped paint on your Infiniti M35x and maintain the luxurious style of your vehicle. Remember to always clean and prepare the surface properly and to choose the right touch-up paint color for the best results.

Apply touch-up paint

To fix chipped paint on your Infiniti M35x AWD, you can use a touch-up paint kit. Color N Drive offers an Infiniti Touch-Up Paint kit that includes everything you need to repair scratches and chips on your car's exterior. This kit is easy to apply and gives excellent results, ensuring your car maintains its luxurious style.

Firstly, prepare the area by cleaning and drying the chipped surface. This will ensure that dirt and debris do not get trapped under the paint, creating a smooth and clean surface for the paint to adhere to.

Next, apply the touch-up paint to the chipped area. Follow the instructions provided with your chosen touch-up paint kit for specific application guidance. Be sure to apply the paint carefully and evenly to match the surrounding paint, blending it well to achieve a seamless finish.

Once the paint is applied, allow it to dry completely. This may take several minutes or longer, depending on the paint type and environmental conditions. Refer to the manufacturer's instructions for an accurate drying time recommendation.

After the paint has cured (usually around three days), you can use a rubbing compound to level the filled area with the rest of the paint. Gently apply the rubbing compound, being careful not to push too hard on the surface. This will help create a smooth and consistent texture, blending the touched-up area with the surrounding paint.

Finally, use a polishing compound to restore the shine to the repaired area. Take your time with this step, as a careful and thorough application will yield near-perfect results. While you may always be able to spot the repair, others won't notice unless you point it out.

Use a paint pen

Fixing chipped paint on your Infiniti M35x AWD is a straightforward process that can help prevent expensive repairs and protect the resale value of your car. Using a paint pen is a perfect solution for small chips and scratches. Here's a step-by-step guide on how to use a paint pen to fix chipped paint:

Prepare the Surface:

Before applying touch-up paint, it is crucial to prepare the surface. Clean the area around the scratch or chip with a general cleaner and a rag to ensure the paint adheres properly. Use a tool, brush, or pick to clean out the chip thoroughly. If there is any rust or rotten spots, use sandpaper to remove them. Ensure the surface is completely dry before proceeding.

Prime the Area:

If there is bare metal exposed or your touch-up kit does not specify "no primer required," consider applying a primer. Dab primer around the edges of the chip and fill the rest. Allow the primer to dry for at least 30 minutes to an hour.

Apply the Paint:

Shake the paint pen to ensure the paint is well mixed, and remove the front cap. Hold the pen vertically and gently press it on a piece of paper to start the paint flow. Apply a small amount of paint over the primed area, building the paint in layers. Avoid applying too much paint at once, as this can lead to an uneven finish. Allow the paint to dry for a couple of days.

Sand and Smooth:

Once the paint is dry, use 1500 to 2000 grit sandpaper to gently sand the area. Wet the surface and sand it until it feels smooth and blended. The goal is to create a seamless finish with no visible ridges or bumps.

Apply Clear Coat:

Unscrew the back of the paint pen to access the clear coat paint and brush. Lightly dab and apply an even coat of clear coat over the sanded area. Allow the clear coat to dry, then wet it down and gently sand it with 3000 grit sandpaper for an even smoother finish.

Buff and Polish:

Remove any painter's tape and dry the area with a rag. Apply a rubbing compound and vigorously buff the surface in a circular motion. Finish by applying a light coat of car wax to protect the new paint and enhance its shine.

Remember, repairing chipped paint with a paint pen may not result in a perfect finish, but it will significantly improve the appearance of your Infiniti M35x AWD. Always take your time, work in a well-ventilated area, and follow the specific instructions on your touch-up paint pen for the best results.

Prevent future chips with a clear bra

A clear bra is a protective film that can be applied to your Infiniti M35x AWD's exterior to prevent paint chips and other damage. It acts as an invisible shield, providing a layer of protection between your car's paint and the elements. The film is made from thermoplastic urethane, a strong polymer that can also self-heal from minor scratches with the application of heat.

Clear bras are typically applied to the front of a vehicle, including the bumper, hood, and fenders—areas that are most susceptible to chips and scratches from road debris, bugs, and bird droppings. They can also protect against UV damage, salt, and de-icing chemicals, which can cause paint to chip and fade over time.

To apply a clear bra, both the adhesive side of the film and the car's surface are sprayed with a special solution of gel, soap, isopropyl alcohol, and water. The film is then stretched and fitted to ensure complete coverage, with edges tucked under spots like wheel wells to prevent exposed paint and seams. Proper installation is crucial to ensure the film is invisible and does not detract from the car's appearance.

With regular maintenance, a clear bra can last between 5 to 10 years. This includes keeping the film clean and free from dirt, debris, and contaminants that can cause damage and discoloration. It's also important to avoid parking under trees or in areas with heavy pollution, as falling leaves, sap, and industrial residue can affect the film.

By investing in a clear bra, you can help maintain your Infiniti M35x AWD's glossy finish and protect it from the wear and tear of daily driving. It's a worthwhile investment to keep your car looking its best and preserve its resale value.

Use a rubbing compound and polish

To fix chipped paint on your Infiniti M35x AWD, you can use a rubbing compound and polish. This method is ideal for small chips and can be done at home with simple tools and products. Here's a detailed guide on how to do it:

Step 1: Clean the Chipped Area

Start by cleaning the chipped area with soap and water. Use a soft microfiber towel or a soft cotton cloth to gently wash and dry the surface. This step ensures that any dirt, grime, or contaminants are removed before you begin the repair process.

Step 2: Apply a Polishing Compound

Take a small amount of automotive polishing compound or rubbing compound and apply it to the chipped area. Use a microfiber towel or a soft cotton cloth to gently rub the compound over the chip. This will help soften any ragged edges and create a smoother surface. Be careful not to over-rub, as it can damage the clear coat and create a cloudy appearance. A dozen swirls or so should be enough.

Step 3: Let the Compound Dry

Once you've applied the polishing compound, let it dry thoroughly. This typically takes some time, so be patient and allow the compound to cure completely. Refer to the product instructions for the recommended drying time.

Step 4: Polish the Area

After the compound has dried, it's time to polish the area. Using a clean cotton cloth, gently polish the repaired spot. This will help blend the edges of the repair, making it less noticeable. You can use a light coat of car wax to aid in the polishing process and protect the new paint.

Tips and Tricks:

• Always test the color of the paint before applying it to the chip. You can do this by applying a small amount to a piece of paper or a hidden area of your vehicle.
• If you can only find the right color paint in a spray can, spray a small amount into the cap and use a fine artist's brush to apply it precisely.
• Ensure you have all the necessary supplies before starting the repair process.
• Remember to act quickly on fresh paint chips before rust starts to form.

Frequently asked questions