Finding Your Ford Crown Victoria's Paint Code

If you are looking to find the paint code for your Ford Crown Victoria, you've come to the right place. Paint jobs are unique to each vehicle, so finding the correct paint code is essential to maintaining your car's value and aesthetic. Ford makes it easy to find the colour code, which is always located on the driver's door jamb. Ford colour codes are simple and consist of two digits, which can be a combination of numbers and letters. For example, PM corresponds to Bright Calypso Metallic Clearcoat, and Black Ebony's colour code is UA.

Check the driver's door jamb for the paint code

To find the paint code of a Ford Crown Victoria, you should check the driver's door jamb. The paint code is always located on the driver's door jamb, making it easy to find. Open the front car door on the driver's side and look at the small ridge around the doorframe on the inside of the car, usually blocked when the door is closed.

The manufacturer's label, which contains the paint code, may be towards the bottom of the jamb, on the rear side, closer to the back of the car. The paint code is usually marked by two characters, which can be either numbers or letters, and is listed above or next to the words "exterior paint colours". For example, if you see the letters "PM" written above "exterior paint colours", this means the colour code is PM, which corresponds to Bright Calypso Metallic Clearcoat.

It's worth noting that older Ford vehicles may have more than two characters in their paint codes. Pre-1970 Fords can be particularly problematic, as Ford used the same name for different paint colours in different years, resulting in different colour codes. If you cannot locate the paint code on the driver's door jamb, you may need to refer to other methods, such as using your vehicle registration number or calling Ford with your VIN number, to determine the correct paint code for your Ford Crown Victoria.

The code will be two digits, a combination of numbers and letters

To find the paint code for your Ford Crown Victoria, you'll need to locate the paint part number on the driver's door jamb label. The exterior paint code will be labelled as EXT PNT followed by two characters, which could be a combination of numbers and letters. For example, PM/M6599 is Bright Calypso Metallic Clearcoat, and the black paint code UA is used on all Crown Vics.

You can also find the paint code on the colour plate, which will show EX PT (Exterior Paint) and then the colour code above or below. Sometimes, the actual colour is embossed on the plate in the middle, which can be confusing. For example, customers have thought their colour code was LX3 because of where it was located on the plate.

Ford makes it fairly easy to find the colour code, but pre-1970 Fords can be problematic. Before 1970, Ford used the same name for different paint colours, so Ocean Blue in 1966 was a completely different colour from Ocean Blue in 1967, with a different colour code.

Once you have the paint code, you can refer to the Motorcraft Chemicals and Lubricants Quick Reference Charts to find the correct touch-up paint for your Ford Crown Victoria.

Pre-1970 Ford paint codes may be problematic

Finding the paint code for a Ford Crown Victoria is usually a straightforward process. The colour code is typically located on the driver's door jamb, and it consists of two digits, which can be a combination of numbers and letters. However, pre-1970 Ford paint codes can be problematic for a few reasons.

Firstly, Ford used the same name for different paint colours in the years before 1970. For example, Ocean Blue in 1966 was an entirely different shade from Ocean Blue in 1967, and they had different colour codes. This inconsistency can make it challenging to identify the correct paint code and colour for pre-1970 Ford vehicles.

Another issue with pre-1970 Ford paint codes is the lack of standardised colour plates. Sometimes, the actual colour name or code is embossed on the plate in an unexpected location, leading to confusion. For instance, customers might assume their colour code is LX3 because that's where it appears on the plate, when in fact, the code is PM. This issue is further complicated by Ford's two-tone colour combinations, where the secondary colour information is often missing, making it impossible to determine the exact colours without additional resources.

Additionally, Ford's marketing department had a significant influence on the naming of paint colours. As a result, a paint code like PM/M6599, which corresponds to Bright Calypso Metallic Clearcoat, could also be referred to as Bright Green Clearcoat or Speed Green Clearcoat, depending on marketing decisions. This inconsistency in naming conventions can make it challenging to identify the correct paint code for pre-1970 Ford vehicles.

Despite these challenges, it is still possible to find touch-up paint for pre-1970 Ford vehicles. Some companies offer touch-up paint specifically for 1970 Ford trucks, guaranteeing a match to the original factory colour chip provided by the manufacturer. This indicates that there are resources available to help identify the correct paint codes and colours for older Ford models, even if the process is more complex than for newer vehicles.

Find the paint part number on the door jamb label

To find the paint part number on the door jamb label of your Ford Crown Victoria, follow these steps:

First, open the driver's door of your vehicle. On the door jamb, which is the door frame that the door shuts onto, you should see a label or sticker. This label will contain various information about the vehicle, including the paint code. The paint code is typically located near where the label says "Exterior Paint Code" or "EXT PNT".

The Ford paint code is usually a simple two-character code, which can be a combination of numbers and letters. For example, "PM" is the colour code for Bright Calypso Metallic Clearcoat. However, older Ford vehicles may have more than two characters in the paint code.

Occasionally, the colour code may be embossed in the middle of the sticker, so be sure to check the entire label carefully. It's important to note that the code shown below "Exterior Paint Code" is usually not the correct paint code.

Once you have located the paint code, you can use it to refer to the Motorcraft® Chemicals and Lubricants Quick Reference Charts to find the corresponding touch-up paint.

By following these steps, you can easily find the paint part number on the door jamb label of your Ford Crown Victoria.

Use a paint pen to touch up the paint

Paint pens are a convenient option for small scratches on your Ford Crown Victoria. They are simple tools to use, as long as you use them properly. Before you start, you will need to identify your Ford Crown Victoria's paint code. This is usually located on the driver's door jamb. Ford paint codes are typically a combination of two digits, which can be numbers and letters. For example, the paint code for Bright Calypso Metallic Clearcoat is PM/M6599, but you will likely only see PM on the ID tag.

Once you have identified the paint code, you can purchase a paint pen that matches your Ford Crown Victoria's factory colour. PaintScratch offers a touch-up paint pen kit that is custom-made to match the OEM colour of your vehicle. The paint pen in this kit is similar to a felt marker but with a firmer chisel tip, making it easy to control and helping to prevent the "blob" problem often seen with brushes.

To use the paint pen, start by sanding the area you want to work on. Then, clean the area with soap and water and add wax to preserve the rest of the paint job. Apply the base coat by gently applying light pressure with the paint pen. Finally, apply the clear coat after the base coat has dried.

For larger paint repairs, you may need to use a brush bottle or a spray paint can to achieve the best results.

Frequently asked questions