Priya Kapoor
Selecting three-stage paint on CCC One involves a few steps. First, you need to access the Vehicle Category and then select Additional Vehicle Options followed by Paint. From there, you can choose Three-Stage Paint User Define and even enter the colour code. CCC guidelines specify that for the first major panel, you should add 70% to the refinish time, and for any additional panels, you should add 40%. This is important for accurate estimates. The Refinish feature in CCC One also allows you to set thresholds for paint materials and clear coat hours, which is applicable to three-stage paint supplies.
| Characteristics | Values |
|---|---|
| How to select three-stage paint on CCC One | Click Paint and select Three-Stage Paint |
| How to select three-stage paint on Audatex | Vehicle Category >>> Additional Vehicle Options >>> Paint >>> Three-Stage Paint User Define |
| How to enter the colour code on Audatex | The system may recognize and automatically switch over to three-stage |
| Setup time for three-stage paint on Audatex | 1.0 hour upon selection of the first major panel, plus 35% of Audatex estimate refinish labour |
| Blend calculation for three-stage paint on Audatex | 50% of Audatex estimate refinish labour after overlap consideration, including two-stage or three-stage allowances |
| Additional time for the first major panel when using CCC | 70% added to the refinish time |
| Additional time for any further panels when using CCC | 40% added to the refinish time |
| Time calculation for blended three-stage paint when using CCC | 70% of the base refinish time |
| Two ways to handle three-stage paint when using Mitchell | Click on the REF SHEET Tab >>> Additional Operations >>> Refinish >>> Select 'Three-stage' or input quick code 933014 in the upper right corner |
| Mitchell's formula for three-stage paint | .7 per refinish hour (70%), after time has been added for jamb, jamb and interior, edge panel, and/or underside |
| Paint material threshold options in the Refinish feature | One, two, and three-stage maximum dollar amounts |
Explore related products
What You'll Learn
Select Three Stage Paint User Define from the drop-down menu
To select "Three Stage Paint User Define" from the drop-down menu, an Audatex operator must first select “Vehicle Category” from the menu. From there, navigate to “Additional vehicle options” and then “Paint”. Finally, choose “Three Stage Paint User Define” from the drop-down menu. You may also enter the colour code, and the system may recognise and automatically switch over to three-stage paint.
The DEG has also offered two alternative methods to handle three-stage paint in the estimating system. The first method involves clicking on the "REF SHEET" tab, then “Additional Operations”, “Refinish”, and finally selecting “Three stage”. The second method is to input the quick code 933014 in the upper right corner.
Additionally, according to CCC, when using Vehicle Options, you can select an option category from the "Select Options" section, and the options included in that category will display in the "Currently Selected Options" section. From there, click "Paint" and select "Three Stage Paint".
Paint Pen Point Precision: How Many MM is Medium?
You may want to see also
Explore related products
$221.99
Calculate three-stage paint with a setup time of 1 hour
To calculate three-stage paint with a setup time of 1 hour, you can follow the guidelines provided by Audatex and CCC. According to Audatex, the calculation for a three-stage paint job involves considering a setup time of 1 hour for the first major panel, along with an additional 35% of the estimated refinish labour. This means that if the estimated refinish labour for a particular panel is 2 hours, the calculation would be 2 hours x 35% = 0.7 hours. So, the total time for that panel would be 1 hour (setup time) plus 0.7 hours (35% of refinish labour), resulting in a total of 1.7 hours.
CCC, on the other hand, provides different guidelines for calculating three-stage paint. They suggest adding 70% to the refinish time for the first major panel and 40% to any additional panels. For instance, if the refinish time for a panel is 2 hours, CCC's calculation would be 2 hours x 70% = 1.4 hours. Therefore, the total time for that panel would be 1 hour (setup time) plus 1.4 hours (70% of refinish time), resulting in a total of 2.4 hours.
It's important to note that these calculations are based on specific guidelines provided by Audatex and CCC, and the actual time required for a three-stage paint job may vary depending on other factors, such as the condition of the surface, the type of paint used, and the skill and techniques of the painter. Additionally, there may be variations in the definitions of "stages" and "steps" among different detailers, further contributing to the lack of standardisation in the industry.
When using a single-stage urethane painting system, such as Eastwood's, the mix ratio is typically 3:1. This means you would mix three parts of single-stage urethane paint with one part activator. It's important to prepare only the amount of paint you need, as the paint may start to gel after approximately two hours at 70°F. Additionally, when setting up your HVLP paint gun, maintain a distance of 6 inches from the surface and aim for a fan pattern that is approximately 6 inches wide for spraying automobiles. For smaller objects, a 4-inch pattern is usually more suitable.
To determine the amount of paint needed for a project, you can use paint calculators available online. These calculators take into account factors such as the dimensions of the room, the number of doors and windows, and the presence of moulding. Additionally, you will need various supplies beyond just the paint and primer, including drop cloths, paint buckets, painter's tape, sandpaper, and a ladder.
Enhancing Images: Adding Pixels in MS Paint
You may want to see also
Explore related products
$231.99
$267.99
Count blended panels at 70% of base refinish time
When it comes to selecting a three-stage paint job on CCC One, it's important to understand how to count blended panels to ensure accurate estimates and refinishing times. CCC has provided guidelines for this process, which we will explore in detail.
Firstly, it's essential to understand the concept of blend percentages. These percentages are used to calculate the refinish times for adjacent panel blend operations. The blend percentages are defined for your specific location and can be configured within the IA Location profile or Estimating Options, depending on the CCC platform you're using. These percentages can vary from 0% to 200%, and you can specify separate values for two-stage and three-stage blend procedures.
Now, let's focus on the instruction to "Count blended panels at 70% of base refinish time." This refers to the percentage associated with three-stage blend procedures. In the context of CCC's guidelines, each blended adjacent panel receives 70% of the panel's published refinish time for three-stage processes. This means that when you're estimating the time required to refinish a panel with a three-stage paint job, you should count each blended panel as contributing 70% of the base refinish time.
For example, if the base refinish time for a particular panel is 10 hours, each blended adjacent panel would count as 7 hours (70% of 10 hours) towards the overall refinish time. This calculation ensures that the additional work involved in blending panels is taken into account when estimating the total refinish time for a three-stage paint job.
It's worth noting that CCC's guidelines also mention that shops should add 70% to the refinish time for the first major panel and 40% to any additional panels included in the three-stage paint job. Additionally, as of October 2023, MOTOR Information Systems (MOTOR) made a change to the Estimated Worktime Development Methodology for the color blend of adjacent panels, giving estimators or appraisers more flexibility in their calculations.
Authenticating Serene Art: Spotting the Real Deal
You may want to see also
Explore related products
Zone painting may be necessary
Zone painting involves adding 70% to the refinish time for the first major panel and 40% to any additional panels. Any blended panel or other area receiving blended three-stage paint should be counted at 70% of the base refinish time. This is in contrast to two-stage paint, which does not require zone painting.
To select three-stage paint on CCC one, an Audatex operator must first pick "Three Stage Paint" as an option by selecting "Vehicle Category >>> Additional vehicle options >>> Paint >>>" and choosing "Three Stage Paint User Define" from the drop-down menu. The colour code can also be entered, and the system may automatically switch over to three-stage paint.
It is important to note that four-stage paint is different from three-stage paint and may require additional steps, such as the application of a ground coat or a tinted clear coat. This should be considered when developing an estimate.
How to Paint Your Kitchen Sink: Regular Paint Edition
You may want to see also
Explore related products
$267.99
Four-stage paint may require an additional ground coat
In a 4-stage paint refinishing process, an additional ground coat may be required, depending on the paint manufacturer. This is in addition to the base and mid-coat applications of a 3-stage process. Some paint manufacturers may use a tinted clear coat in addition to the final non-tinted clear coat. These additional steps are not included in the standard 3-stage finish and should be considered when developing an estimate using an on-the-spot evaluation.
The specific steps and requirements for a 4-stage paint job may vary depending on the paint manufacturer and the specific vehicle being painted. It is important to refer to the manufacturer's instructions and recommendations for the best results.
For example, CCC states that Soul Red, seen on the 2017 Mazda3, can be either a three- or four-stage formula. The four-stage formula requires the application of a ground coat or a tinted clear coat, which is not included in the three-stage finish.
When considering a 4-stage paint job, it is essential to take into account the additional time, materials, and costs associated with the extra steps. The application of a ground coat or tinted clear coat can impact the overall refinish time and labour costs.
Additionally, painters should be aware that certain operations or repairs may need to be added manually to the estimate for a 4-stage paint job. This is because standard estimating systems may not always account for all the steps and processes involved in a 4-stage refinish.
A Father's Painting: A Story of Love and Loss
You may want to see also
Frequently asked questions
To select three-stage paint on CCC One, click on "Paint" and then select "Three-Stage Paint".
Three-stage paint involves a base and mid-coat application, and may also include an additional ground coat. This is in contrast to two-stage paint which does not include a mid-coat application.
The cost of three-stage paint can be calculated by entering a maximum clear coat hour amount and a maximum paint supplies value for each paint type. This will allow you to set up refinish rules and create an estimate.
To identify a three-stage refinishing job, an Audatex operator must pick "Three-Stage Paint" as an option under "Vehicle Category >>> Additional Vehicle Options >>> Paint >>>" and choose "Three-Stage Paint User Define" from the drop-down menu.
