Elena Rossi
The Mercury Grand Marquis was the final vehicle to roll off the Mercury production line in 2011, after which the brand was discontinued. If you're looking to repair your Mercury Grand Marquis, it's important to find the correct paint colour. Mercury makes it easy to find the colour code, which is always on the driver's door jamb. However, for pre-1970 Mercurys, there may be some confusion as the same paint colours were given different names in different years. For example, Ocean Blue in 1966 was a completely different colour from Ocean Blue in 1967, and they had different colour codes. To guarantee the accuracy of a colour, paint should be ordered based on the colour code, which is usually a two-character code, like 'UA' or 'YN', followed by an additional code after a slash.
| Characteristics | Values |
|---|---|
| Mercury Grand Marquis production line discontinued | 2011 |
| Location of paint code | Driver's door jamb |
| Paint code characteristics | Two characters, e.g. 'UA', 'YN' |
| Additional code | Additional code after '/' which can be ignored |
| Example paint codes | Silver Birch Pearl Metallic - JP/M7052, Light Tundra Metallic - DV/M7081, Arizona Beige Metallic - AQ/M6985 |
Explore related products
What You'll Learn
- Paint codes are located on the manufacturer's tag on the driver's door jamb
- Pre-1970 models can be problematic as the same paint name was used for different colours
- The colour plate will show 'EX PT' for exterior paint
- The colour code will be above or below this
- Mercury uses the same colour across models but with different names, so the code is important
Paint codes are located on the manufacturer's tag on the driver's door jamb
If you are looking to find the paint code for your Mercury Marquis, the paint codes are located on the manufacturer's tag on the driver's door jamb. This is the same for all models, whether you drive a Mountaineer or a Village.
In the rare case that the tag is not on the door jamb, you may need to call the manufacturer or check the VIN sticker, where Mercury codes are typically two-digit codes made up of letters and numbers.
For pre-1970 Mercurys, there were instances where different paint colours were given the same name, so an Ocean Blue in 1966 would be a different colour to an Ocean Blue in 1967. This also meant that they had different colour codes.
The tag will only contain the short code, for example, G2, and not the longer code or description, such as MEDIUM AUBERGINE METALLIC. You can find the code underneath the barcode at the bottom of the label.
Creating a Horizontal Stripe Feature Wall
You may want to see also
Explore related products
Pre-1970 models can be problematic as the same paint name was used for different colours
For Mercury Marquis models manufactured pre-1970, it can be challenging to determine the exact paint colour due to Mercury's practice of assigning the same name to different colours. For instance, the colour "Ocean Blue" in 1966 was significantly different from "Ocean Blue" in 1967, and they had distinct colour codes. This inconsistency in colour naming can make it difficult to identify the correct paint code for accurate touch-up paint selection.
To address this issue, it is essential to refer to the colour code rather than solely relying on the colour name. The colour code can be found on the driver's door jamb, typically on the manufacturer's tag. In rare cases, if the tag is missing from the door jamb, it is advisable to contact the paint manufacturer for assistance. The colour code usually consists of a combination of letters and numbers and may be two digits long.
For example, the code WT/M6640 corresponds to "Performance White Clearcoat," but it could also be marketed as "White Clearcoat" or "Speed White Clearcoat." This variation in marketing names for the same colour highlights the importance of relying on the colour code when ordering touch-up paint to ensure an accurate match.
Additionally, Mercury offered many two-tone colour combinations for their vehicles. However, Mercury's two-tone colour coding was not always adequately documented, and the secondary colour information may be missing. In such cases, it may be necessary to refer to a Mercury colour book to accurately identify the two-tone colours of a specific model.
By focusing on the colour code and consulting reliable resources, such as colour books, owners of pre-1970 Mercury Marquis models can navigate the complexities of paint colour identification and make informed decisions when repairing or restoring their vehicles.
The NWO's Tag Titles: Why They Stayed Untouched
You may want to see also
Explore related products
The colour plate will show 'EX PT' for exterior paint
Finding the paint code for your Mercury Marquis is fairly straightforward. The paint code is located on the manufacturer's tag on your vehicle, which can typically be found on the driver's door jamb.
However, for Mercury vehicles manufactured before 1970, determining the paint code can be problematic. This is because Mercury used the same name for different paint colours across model years. For example, Ocean Blue in 1966 is a completely different colour from Ocean Blue in 1967, and they have different colour codes.
On the colour plate, you will typically see 'EX PT' (short for Exterior Paint) followed by the colour code. Sometimes, the actual colour is embossed on the plate, which can be confusing. For instance, WT corresponds to Performance White Clearcoat, but it could also be called White Clearcoat or Speed White Clearcoat.
If you are unable to locate the manufacturer's tag on the driver's door jamb, you may need to look elsewhere or contact a specialist for assistance.
Erase Paint Lines Without Affecting Images: A Simple Guide
You may want to see also
Explore related products
The colour code will be above or below this
The colour code is always two characters, for example, 'UA' or 'YN'. The codes will also have an additional code after the '/'. In nearly all cases, you can ignore this and just look for the two-letter code.
Mercury, like all manufacturers, uses the exact same colour across many models and then will have a different colour name for each model. It's the same paint! This is why the colour code is so important to order the correct paint. For example, WT/M6640 above is called Performance White Clearcoat, but it could also be called White Clearcoat or Speed White Clearcoat, depending on the marketing department.
Mercury makes it fairly easy to find the colour code. However, pre-1970 Mercurys can be problematic. Mercury was calling different paint colours the exact same name so an Ocean Blue in 1966 was completely different from an Ocean Blue in 1967. A different colour code, too.
Chippy Paint Finish: Valspar's Guide to Distressing Furniture
You may want to see also
Explore related products
Mercury uses the same colour across models but with different names, so the code is important
Mercury, like all manufacturers, uses the exact same colour across many models but gives each model a different colour name. For example, WT/M6640 is called Performance White Clearcoat, but it could also be called White Clearcoat or Speed White Clearcoat, depending on the marketing department's decision. This is why the colour code is so important to order the correct paint.
For Mercury vehicles, the paint codes are located on the manufacturer's tag on your vehicle. This is usually found on the driver's door jamb. However, if the tag isn't there, it may be located elsewhere. On the VIN sticker, Mercury codes are typically two digits long and are usually made up of letters and numbers. For example, DX/M7083A/Dark Blue Pearl, E9/M6688A/Laser Red Metallic, and FQ/M7240A/Bordeaux Reserve Metallic.
If you are looking for touch-up paint for your Mercury Grand Marquis, you can find the paint code on the driver's door jamb. Pre-1970 Mercurys can be problematic as the same paint colour was given different names in different years. For example, Ocean Blue in 1966 was completely different from Ocean Blue in 1967, and they had different colour codes.
Some Mercury Grand Marquis paint colours and their codes include Silver Birch Pearl Metallic (JP/M7052), Light Tundra Metallic (DV/M7081), and Arizona Beige Metallic (AQ/M6985).
Glow-in-the-Dark Rooms: Painting with a Luminous Twist
You may want to see also
Frequently asked questions
The paint code for your Mercury Marquis can be found on the driver's door jamb.
In rare cases, the paint code may not be on the door jamb. In such cases, you can contact the manufacturer's customer support for assistance.
Mercury Marquis paint codes are typically two characters long, such as "UA" or "YN". They may also have an additional code after a slash, for example, "UA/M6373".
Mercury, like other manufacturers, uses the same colour across multiple models but gives it a different name for each. Knowing the paint code ensures you order the correct colour.
It is recommended to verify the paint code on your vehicle before ordering touch-up paint. Paint suppliers usually guarantee that the paint will match the original colour chip provided by the manufacturer.
