Priya Kapoor
Setting up the Deco 01 for Paint Tool Sai can be a tricky process. Users have reported issues with the Deco 01 tablet, including the cursor getting stuck in the upper left corner of the screen, and the tablet not working with Paint Tool Sai at all. Some troubleshooting steps that have been suggested include uninstalling and reinstalling tablet drivers, using absolute mode instead of relative mode, and adjusting the Min Size and Click detection pressure settings in Sai. While XP-Pen has provided some support and free downloads for users experiencing issues, it appears that some users continue to have problems getting their Deco 01 tablet to work with Paint Tool Sai.
| Characteristics | Values |
|---|---|
| Tablet compatibility | Star 01, Star 02, Star 03, Star 04, Star G430, Star 05, Star G540, Star 06, Star 06C, Star 03 Pro, Star G640, Star G430S, Star G640S, Artist 10S, Artist 22, Artist 22E, Artist 16, Artist 13.3, Artist 15.6, Artist 16 Pro, Artist 22 Pro, Artist 22E Pro, Artist 12, Artist 15.6 Pro, Deco 01, Deco 03, Deco 02, Star G540 Pro, Deco Pro S/M, Artist 13.3 Pro, Deco 01 V2, Artist 12 Pro, and Star G960. |
| Cursor issues | Cursor stuck in the upper left corner when Paint Tool Sai is open. |
| Troubleshooting | 1. Uninstall all tablet drivers, including XP-Pen driver. 2. Reinstall the latest driver. 3. Ensure tablet functions in software other than SAI. 4. Adjust brush settings: set "Min Size" to under 100% and "Click detection pressure" to "0." 5. Use absolute mode instead of relative mode when using Sai. |
Explore related products
What You'll Learn
Uninstall all tablet drivers
To uninstall all tablet drivers, follow these steps:
- Open the Start menu and navigate to Control Panel > Programs and Features. Check the list of programs for any tablet drivers, including your XP-Pen driver, and uninstall them completely.
- Reboot your computer after uninstalling any tablet software.
- After rebooting, click on the "Start" menu and search for "Tablet preferences." If you find any tablet software still installed, repeat step 1.
- To ensure a clean uninstall, go into the Device Manager and expand "Human Interface Devices." Look for any tablet drivers listed there and uninstall them.
- Plug in your tablet and run the installer for your new tablet. Install all the necessary drivers and software for your tablet.
- Open the control center for your new tablet and check if it detects the tablet.
By following these steps, you can completely uninstall all tablet drivers and avoid any potential conflicts with your new tablet.
Deep-Jointed Block Painting: A Step-by-Step Guide
You may want to see also
Explore related products
Reinstall the latest tablet driver
To reinstall the latest tablet driver for your Deco 01 tablet, follow these steps:
- Ensure that all tablet drivers, including your XP-Pen driver, are uninstalled completely. To do this, open the Start menu, then go to Control Panel >> Programs and Features. Check your programs list for any tablet drivers and uninstall them. Reboot your computer after uninstalling.
- After rebooting, click “Start,” then search for “Tablet preferences.” If you find any tablet software installed, repeat step 1 until all tablet software has been uninstalled.
- Reinstall your tablet’s latest driver by visiting the official website of your tablet manufacturer and downloading the latest driver from the Support or Downloads section. Make sure to download the driver that is compatible with your specific tablet model and operating system version. Reboot your computer again after installing the new driver.
- Check if your tablet is now functioning correctly in software other than Paint Tool SAI. If it works in other software, open Paint Tool SAI and test the tablet functionality again.
- If you still experience issues with your tablet in Paint Tool SAI, try opening the SAI installation path and accessing the “misc.ini” file using a text editing program such as Notepad. Scroll down to the “TabletMouseSimulation” entry and make any necessary adjustments.
It is important to ensure that you have downloaded and installed the correct driver for your specific tablet model and operating system. Incompatible or outdated drivers can cause issues with your tablet's functionality. Additionally, some users have reported that the pen functionality in Paint Tool SAI may be affected by the sleep or restart of the computer, requiring reinstallation of the drivers.
Relieving Scrotum Pain: What to Take?
You may want to see also
Explore related products
Use absolute mode in Paint Tool SAI
If you're setting up an XP-Pen Deco 01 tablet for Paint Tool SAI, you may encounter a problem where the cursor shoots to the upper left corner of the screen and won't move. This issue occurs when using the software in relative mode, as Paint Tool SAI does not support this mode.
To resolve this issue, it is recommended to use absolute mode when working with Paint Tool SAI. To do this, follow these steps:
- Open Paint Tool SAI.
- Access the settings or preferences menu, typically found under the File or Edit menu.
- Look for an option that says "Tablet Settings" or "Tablet Mode" and select it.
- Change the setting from relative mode to absolute mode.
- Save your changes and exit the settings menu.
By switching to absolute mode, you should now be able to use your XP-Pen Deco 01 tablet without the cursor jumping to the upper left corner.
It's important to note that while absolute mode resolves the cursor issue, you may encounter another problem where the pen cannot click anything. Usually, this can be fixed by pressing harder with the pen.
The Magic of Paint Palettes: Unveiling Creative Possibilities
You may want to see also
Explore related products
Adjust brush settings
To adjust your brush settings in Paint SAI, you should first access the toolbar. From there, click on "Others" and then "Options". This will open up the "Digitizer Support" tab. Here, you can adjust the "Click detection pressure" to your desired level, with a lower setting allowing for a higher range of pen pressure.
You can also adjust the "Min Size" of your brush. This setting can be found under the "Brush Settings". Lowering the "Min Size" will also allow for a higher range of pen pressure. This setting should be set to a number under 100%.
Adjusting these settings will allow you to customise your brush to your preferred level of pen pressure sensitivity. Play around with the settings to find the right balance for your artwork.
Recycling Paint Cans in Sierra Vista, Arizona: What You Need to Know
You may want to see also
Explore related products
Set Click detection pressure to 0
Setting up the Deco 01 for Paint SAI can be tricky, but it is possible to get it working. The first step is to ensure that your tablet's driver is up to date and that you have uninstalled any conflicting tablet software. You can do this by opening the Start menu, navigating to Control Panel > Programs and Features, and checking the list of programs for any tablet software. If you find any, uninstall it and reboot your computer.
Once you have ensured that your tablet software is up to date and there is no conflicting software installed, you can move on to configuring Paint SAI. Open the program and navigate to the "Others" option on the toolbar, then select "Options". In the "Digitizer Support" tab, you will find the "Click detection pressure" setting. Set this to "0".
It is important to note that Paint Tool SAI does not support relative mode. This can cause issues with the cursor, such as it being stuck in the upper left corner of the screen. To avoid this issue, it is recommended to use absolute mode when using SAI with your Deco 01 tablet.
By following these steps, you should be able to successfully set up your Deco 01 tablet for use with Paint Tool SAI, with the "Click detection pressure" set to "0".
Creating a Cute Ladybug Rock Art
You may want to see also
Frequently asked questions
This issue is related to the Sai software, which doesn't support relative mode. Users are recommended to use absolute mode when using Sai.
Install the latest drivers from the manufacturer's website. Ensure that you uninstall any previous drivers before installing the new ones.
In your brush settings, set "Min Size" to a number under 100%. Then, in the toolbar, go to "Others" > "Options" > "Digitizer Support" and set "Click detection pressure" to "0".
Try disabling Windows Ink and setting the pressure to 0 in Sai. If that doesn't work, you may need to uninstall and reinstall the drivers each time your computer sleeps, restarts, or shuts down.
No, according to users, relative mode does not work with Paint Tool Sai. You will need to use absolute mode when working in Sai.
