Isabella Flores
Wet & Forget is a gentle outdoor cleaning product that can be used on a variety of surfaces, including decks, driveways, roofs, and boats, to remove moss, mould, mildew, and algae. It is important to start with a clean, growth-free surface before painting, staining, or sealing, and Wet & Forget can help achieve this. The product is applied by spraying it onto a dry surface, and it works with the wind and rain to gently clean and remove decomposing material. The time it takes to work depends on the type of growth, but it can take anywhere from a few days to a couple of weeks or even months. Once the surface is clean, it is possible to paint or stain right away. However, it is recommended to wait for 2-3 weeks to allow for the growth to decompose completely, and to gently pressure wash the surface before painting.
| Characteristics | Values |
|---|---|
| Time to work | Depends on the type of growth. Light growth may take a few days to a couple of weeks, while heavier growth may take 2-3 months. |
| Application process | Apply on a cool, dry, windless day with no rain forecast for at least 4-6 hours. Dilute 1 part Wet & Forget with 5 parts water and saturate the dry surface. |
| Results | May not be immediate. Moss may turn brown instantly, and concrete may turn orange-brown, but these are natural reactions. |
| Reapplication | An annual spray should keep moss, lichen, algae, and mould away. However, reapply sooner if new growth appears. |
| Surface preparation | Remove any excess debris, but it is not necessary to clean the surface before application. |
| Surfaces suitable for use | Concrete, decking, painted or textured surfaces, natural stone, ceramic pots, boats, etc. |
| Surfaces not suitable for use | Vinyl. |
| Safety | Wear disposable gloves and protective eyewear. Take a shower soon after application and wash clothes. Keep out of reach of children and pets. |
Explore related products
What You'll Learn
Wet & Forget can be used on any outdoor surface
Wet & Forget is a versatile outdoor cleaning product that can be used on a wide range of exterior surfaces. Its gentle formula effectively removes moss, mould, algae, lichen, and mildew without damaging the underlying material.
Wet & Forget is suitable for a variety of outdoor surfaces, including concrete driveways and walkways, patios, pool surrounds, asphalt driveways, and various types of roofing. It can also be used on materials such as fiberglass, brick, painted or textured surfaces, natural stone, ceramic pots, wood and composite decks, AstroTurf, tennis courts, canvas awnings, and even boats and RVs. The product is designed to be applied with a garden sprayer, diluted at a ratio of 1 part Wet & Forget to 5 parts water.
One of the key advantages of Wet & Forget is its ability to clean and prepare surfaces for painting or staining. By removing growth, dirt, and residue, it extends the life of painted surfaces and reduces the likelihood of contamination by algae and fungi. It is recommended to thoroughly saturate the surface with Wet & Forget on a cool, dry day, allowing 2-3 weeks for the growth to decompose before painting or staining.
The versatility of Wet & Forget extends to its application in various climates and seasons. In hot regions, it is important to ensure the treated surface isn't too hot to prevent rapid evaporation. Early mornings or overcast days are ideal for application. In humid areas, reapplication may be necessary to address the frequent reappearance of stains. For cold or subarctic regions, it is recommended to wait until temperatures are above 55 degrees Fahrenheit before applying Wet & Forget Xtreme Reach™.
Wet & Forget is a convenient and effective solution for cleaning and maintaining a wide range of outdoor surfaces, making it a versatile tool for homeowners and businesses alike.
Arizona Landlords: Know Your Painting Obligations
You may want to see also
Explore related products
It is ideal for roof, deck, and poolside cleaning
Wet & Forget is a cleaning solution that can be used on various outdoor surfaces, including roofs, decks, and poolside areas. It is a convenient and effective method for removing stains, mould, mildew, and algae from these surfaces without the need for scrubbing or pressure washing.
When it comes to roof cleaning, Wet & Forget is ideal for treating unsightly stains caused by algae, moss, or lichen growth. It can be safely used on various roof types, including asphalt shingles, metal, and tile roofs. By simply spraying it onto the affected areas, Wet & Forget will work over time to break down and eliminate the stains, restoring the roof's appearance.
For decks, Wet & Forget is a gentle yet powerful solution for removing mould, mildew, and algae that can make the surface slippery and unsightly. Its safe to use on wood, composite decking, and concrete surfaces. Applying Wet & Forget will help prevent the regrowth of these organisms, keeping your deck clean and safe for longer.
Similarly, Wet & Forget is excellent for cleaning poolside areas, including concrete, pavers, and stone surfaces. It effectively eliminates the slimy buildup caused by algae and mould, which can make the pool area hazardous and unattractive. By using Wet & Forget, you can maintain a clean and inviting poolside environment without resorting to harsh scrubbing or chemicals.
One of the key advantages of Wet & Forget is its long-lasting effectiveness. Once applied, it continues to work over time, preventing the regrowth of stains and organic contaminants. This means you can spend less time cleaning and maintaining your roof, deck, and poolside areas, and more time enjoying these outdoor spaces.
Overall, Wet & Forget is an ideal solution for cleaning and maintaining roofs, decks, and poolside areas. It provides a simple, safe, and effective way to remove stains and organic growth, keeping your outdoor surfaces looking their best with minimal effort and disruption.
Mixing Paint: 5 Gallons, Easy Steps
You may want to see also
Explore related products
The surface should be clean and dry before application
To ensure the best results when applying Wet & Forget, it is important to start with a clean, dry surface. This is because Wet & Forget is a gentle product that works with the wind and rain to clean surfaces over time. By starting with a dry surface, you allow Wet & Forget to gently take effect as Mother Nature takes over, gradually removing decomposing material without scouring the surface.
When preparing to paint, stain, or seal a surface, it is crucial to ensure that the surface is not only clean but also free of any growth, including moss, mould, mildew, and algae. This is important because these growths can affect the performance and longevity of your paint, stain, or sealer.
Wet & Forget can be applied to a wide range of outdoor surfaces, including decking, driveways, patios, and roofs. It is designed to be used on dry surfaces and should not be washed or cleaned before application. However, it is recommended to remove any excess debris from the surface.
When applying Wet & Forget, choose a cool, dry day with no rain forecast for at least 4 to 6 hours after application. This allows the product to dry completely, which typically takes about 4 to 5 hours. Once the surface is dry to the touch, you can proceed with painting, staining, or sealing.
In summary, by starting with a clean and dry surface before applying Wet & Forget, you create the ideal conditions for the product to work effectively. This ensures that your outdoor surfaces are properly prepared for any subsequent painting, staining, or sealing projects.
Master Painting Roses Quickly and Beautifully
You may want to see also
Explore related products
It takes 4-5 hours to dry, and then you can paint over it
Wet & Forget is a gentle outdoor cleaning product that removes moss, mould, mildew, and algae. It is ideal for use on roofs, decks, and the north side of houses, which are known for mould and mildew growth. The product is bleach-free and non-acidic, and can be used on a variety of outdoor surfaces, including concrete, brick, painted surfaces, natural stone, decks, boats, and more.
When using Wet & Forget, it is important to follow the instructions carefully. Firstly, choose a cool, dry day with no rain forecast for at least 4-6 hours after application. The surface to be treated should be dry, and any excess debris should be removed. The product should be diluted at a ratio of 1 part Wet & Forget to 5 parts water and applied using a garden sprayer or a pump-up garden sprayer for larger surfaces.
After application, Wet & Forget takes 4-5 hours to dry completely. During this time, keep pets and people away from the treated area to ensure they don't ingest the product. Once it is dry, it is safe for people and pets to walk on the surface, even if it rains.
After the 4-5 hour drying time, you can paint or stain over the treated surface. In fact, applying paint or stain after using Wet & Forget can help extend the life of the surface and protect it from the elements. It is recommended to wait 2-3 weeks after application to allow the growth to decompose before painting or staining. During this time, you may see an instant reaction, such as treated moss turning brown, and surfaces like concrete may turn an orange-brown colour. These temporary colour changes are a natural reaction between the growth and the Wet & Forget solution.
Estimating Commercial Painting Costs: Price per Square Foot
You may want to see also
Explore related products
An annual spray will keep moss, lichen, algae, and mould away
Wet & Forget is a gentle outdoor cleaning product that can be used on any exterior surface, including concrete, brick, natural stone, wood, canvas, boats, and more. It is safe to use around pets and will not damage glass or windows. The product is designed to remove and prevent the growth of moss, lichen, algae, and mould.
To use Wet & Forget, simply dilute one part product with five parts water in a garden sprayer. Apply the solution to a dry surface, ensuring there is no rain forecast for at least 4-6 hours after application. After applying, you can just walk away and let Mother Nature take over. The product will gently decompose any organic material without scouring the surface it has infested.
While you may see an instant reaction, such as treated moss turning brown, it can take a few days to a couple of weeks to see results. For heavier growth, it may take 2-3 months to see improvement. An annual spray of Wet & Forget should keep moss, lichen, algae, and mould at bay. However, if any new growth appears, reapply sooner. Ideally, apply at the first sign of green growth to a dry surface.
Once the surface is clean and free of growth, you can paint or stain right over Wet & Forget. It is recommended to wait 2-3 weeks after application before painting or staining, and gently pressure wash the surface before painting. Spraying your house annually with Wet & Forget will extend the life of your paint by removing the growth and preventing its recurrence.
Unleashing Your Inner Artist: A Guide to Learning Painting
You may want to see also
Frequently asked questions
You can paint or stain once the surface is completely clean. This could take a few days to a couple of weeks, or even 2-3 months, depending on the type of growth.
It depends on the type of growth. Light growth may take a few days to a couple of weeks, whereas heavier growth may take 2-3 months.
In some cases, you may need to scrub the surface with a brush and warm water after a month. Then, reapply Wet & Forget.
An annual application of Wet & Forget should keep moss, lichen, algae, and mould away. However, if new growth appears, reapply sooner.
