Priya Kapoor
Fusion Mineral Paint's Ultra Grip is a bonding agent and adhesion primer that helps paint stick to typically tricky surfaces. It is ideal for use on surfaces that can't be sanded, such as thermofoil, melamine, or laminate. It can be applied using a brush, roller, applicator pad, or sponge, and it is recommended to apply it in a thin layer, allowing it to dry for 12-24 hours before painting. Ultra Grip is non-toxic and water-based, making it a safe and effective solution for challenging painting projects.
| Characteristics | Values |
|---|---|
| Application | Brush, roller, applicator pad, or sponge |
| Consistency | Thin layer |
| Colour | Milky in the bottle, clear when applied |
| Drying time | 12-24 hours for best results, but can paint after 2 hours |
| Surfaces | Lacquered, laminate, melamine, thermofoil, glass, metal |
| Adhesion | Helps Fusion stick to slippery surfaces |
| Primer | Not a transition primer |
| Tannins or rust | Does not stop bleed-through |
| Shipping | Ships within 2-3 days of ordering |
Explore related products
![Ringke Fusion Designed for Samsung Galaxy S23 Ultra Case [Compatible with MagSafe] Transparent Scratch Resistant Shockproof Bumper Phone Cover - Magnetic Matte Clear](https://m.media-amazon.com/images/I/71rUW84vAbL._AC_UL320_.jpg)
What You'll Learn
- Ultra Grip™ is an adhesion primer for slippery surfaces
- It is not a transition primer for painting over dark or bright colours
- Apply a thin layer of Ultra Grip™ using a brush, roller, applicator pad, or sponge
- Allow Ultra Grip™ to dry for 12 hours for best results, but you can paint after 2 hours
- Ultra Grip™ is ideal for difficult surfaces like melamine, lacquered surfaces, or laminate
Ultra Grip™ is an adhesion primer for slippery surfaces
Ultra Grip™ is an adhesion primer that helps Fusion Mineral Paint stick to slippery surfaces. It is not a transition primer for painting over dark or bright colours. It is also not suitable for blocking stains and bleed-through from tannins or rust. For this, a shellac-based primer is recommended.
Ultra Grip™ can be used on surfaces that cannot be sanded, such as thermofoil, melamine, some laminates, or detailed surfaces that are too difficult to scuff. It is a non-toxic, water-based bonding agent that can be applied with a brush, roller, applicator pad, or sponge. It is important to note that Ultra Grip™ will hold texture, and this texture can show through to the final layer of paint. Therefore, it should be applied in a very thin layer. The product is milky in the bottle but should be clear when applied.
To use Ultra Grip™, start by lightly sanding and cleaning the surface to ensure the removal of any wax or coatings that may repel paint. Then, apply a thin coat of Ultra Grip™ and let it dry for at least 2 hours before painting. For best results, it is recommended to wait 12-24 hours for the Ultra Grip™ to dry completely. After the waiting period, you can proceed with applying Fusion Mineral Paint.
The total curing time for Ultra Grip™ is 21 days. During this time, the product will become more transparent, starting with a whitish sheen in the first 15-30 minutes after application. It is important to cover the surface evenly, ensuring no pooling or missed spots.
The Best Frequency for Painting Your House
You may want to see also
Explore related products
![Lamicall Magnetic Phone Ring Grip for MagSafe - [4.4lbs Ultra Magnet] Finger Holder, Father's Day for Father, 360° Metal Gear Hinge Ring Stand for iPhone 16 15 14 Pro Max, Cases, Mag Safe Accessories](https://m.media-amazon.com/images/I/7171Kkv7R9L._AC_UL320_.jpg)
It is not a transition primer for painting over dark or bright colours
Fusion Mineral Paint's Ultra Grip is a bonding agent and adhesion primer. It is designed to help Fusion Mineral Paint adhere to surfaces that are typically difficult to paint, such as lacquered surfaces, melamine, thermofoil, or laminate. It is not a transition primer for painting over dark or bright colours.
Ultra Grip is not designed to cover or neutralise dark or bright colours. Instead, it is meant to be used as a base layer to help the paint adhere to challenging surfaces. If you are painting over dark or bright colours, the manufacturer recommends using a light grey paint, such as Sterling, as a transition primer. This will help to neutralise the previous colour and create a better surface for your desired paint colour to adhere to.
It is important to note that Ultra Grip is not a substitute for proper surface preparation. Before applying Ultra Grip, it is recommended to lightly sand and clean the surface, removing any wax or polish that may interfere with the adhesion of the product. Additionally, Ultra Grip should be applied in a very thin layer. While the product is milky in the bottle, it should be clear when applied. This will help prevent brush strokes or texture from showing through in the final layer of paint.
Allowing adequate drying and curing time is crucial when using Ultra Grip. While you can paint as early as 2 hours after application, it is recommended to wait at least 12 hours for optimal results. The total curing time for Ultra Grip is 21 days, and adequate curing time ensures maximum adhesion and durability.
Remember, Ultra Grip is not designed to stop bleed-through from tannins or rust. If you are concerned about these issues, a shellac-based primer, such as Zinsser BIN, is recommended instead.
Capturing Savannah's Saltwater Marsh: A Painter's Guide
You may want to see also
Explore related products
Apply a thin layer of Ultra Grip™ using a brush, roller, applicator pad, or sponge
To apply a thin layer of Ultra Grip™, you can use a brush, roller, applicator pad, or sponge. It is recommended to apply a thin layer of Ultra Grip™ to avoid the texture showing through to the final layer of Fusion Mineral Paint. The product is milky in the bottle, but it should be clear when applied.
When applying Ultra Grip™ with a brush, be mindful not to apply it too heavily, as this will result in visible brush marks. Instead, apply it thinly and sparingly. If you are using a roller, a microfibre mini roller works best.
Before applying Ultra Grip™, it is important to clean, sand, and then clean your surface again. Remove any wax or pledge that may repel the Ultra Grip™. After applying, allow it to dry for at least 2 hours before painting. For best results, it is recommended to wait 12-24 hours. The total curing time of Ultra Grip™ is 21 days.
Creating a Dot in MS Paint: A Simple Guide
You may want to see also
Explore related products
![Case Compatible for HMD Fusion 5G Phone Case Cover [with Tempered Glass Screen Protector][Hard PC + Soft Silicone][Ring Support] [Colorful Reflect Light] IMDF-JXX](https://m.media-amazon.com/images/I/71flfUxV3SL._AC_UL320_.jpg)
Allow Ultra Grip™ to dry for 12 hours for best results, but you can paint after 2 hours
Ultra Grip™ is a bonding agent that can be used to help Fusion Mineral Paint adhere to tricky surfaces that are typically not suitable for painting. These include lacquered surfaces, melamine, thermofoil, and laminate. It can also be used on surfaces that you can't sand, such as some laminates or detailed surfaces that are too difficult to scuff.
To use Ultra Grip™, first clean, sand, and then clean your surface again. Remove any wax or pledge that may be present as these coatings repel applied paint. Then, with a clean damp sponge or Fusion Applicator Pad, apply a very thin coat of Ultra Grip™. The product is milky in the bottle but should be clear when applied.
Allow Ultra Grip™ to dry for 12 hours for the best results. This is the ideal drying time when painting a piece of furniture with Ultra Grip™ and Fusion Mineral Paint. However, you can paint after 2 hours of application if you don't want to wait. Just be aware that if your surface is exceptionally tricky and slick, you may reactivate the Ultra Grip™ if you don't allow it enough time to cure before applying another coat of paint.
The total curing time for Ultra Grip™ is 21 days. The longer it dries, the more transparent it becomes. When applying, ensure you cover everything with an even coat, avoiding any pooling or missed spots.
Creating a Transparent USA Stamp with Paint
You may want to see also
Explore related products
Ultra Grip™ is ideal for difficult surfaces like melamine, lacquered surfaces, or laminate
Ultra Grip™ is a bonding agent and adhesion primer that helps Fusion Mineral Paint stick to difficult surfaces like melamine, lacquered surfaces, or laminate. It is ideal for surfaces that are typically hard to paint, such as thermofoil or some laminates, or detailed surfaces that are too difficult to scuff. It can also be used on surfaces that you can't sand, such as thermofoil or high-gloss coatings.
To use Ultra Grip™, first clean, sand, and then clean your surface again. Remove any wax or pledge, as these coatings repel paint. Then, apply a thin coat of Ultra Grip™ using a brush, roller, applicator pad, or sponge. The product is milky in the bottle but should be clear when applied. Allow it to dry for 12 hours for best results, although you can paint after 2 hours. After applying Ultra Grip™, you can continue with Fusion Mineral Paint, which will bind to its surface.
Ultra Grip™ is 100% pure resin, so it is important to apply paint after it has dried, as adding paint to the resin will make it less effective. It is also non-toxic and water-based, curing through the evaporation of water. The total curing time for Ultra Grip™ is 21 days.
A good way to tell if you need Ultra Grip™ is to paint a test area with just Fusion Mineral Paint. If the paint laces or beads, it indicates that you need to use Ultra Grip™.
Manifest Destiny: American Progress Painting Explained
You may want to see also
Frequently asked questions
First, clean, sand, and then clean your surface again. Be sure to remove any wax or pledge. Then, apply a thin coat of Ultra Grip using a brush, roller, applicator pad, or sponge. Allow it to dry for 12-24 hours before applying paint.
Ultra Grip is an adhesion primer that helps Fusion Mineral Paint stick to tricky, slippery surfaces such as lacquer, melamine, thermofoil, or laminate.
Yes, you can use a brush to apply Ultra Grip. However, because Ultra Grip can hold texture, you may see brush marks in the final layer of Fusion Mineral Paint. To avoid this, apply Ultra Grip in a very thin layer.
Yes, Ultra Grip can be used on laminate surfaces. However, some users have reported better results on vinyl or glossy surfaces.
It is recommended to wait at least 12 hours after applying Ultra Grip before applying Fusion Mineral Paint. This will ensure the best adhesion.
