Leo Martínez
Behr manufactures highly-rated paints, primers, and stains that offer premium quality at a range of price points. Behr Premium Advanced DeckOver is a coating that resurfaces existing wooden decks by filling in cracks and taming splinters, extending the life of your deck. However, there are several negative reviews of the product, with customers complaining about the product peeling off, trapping moisture, and rotting the wood. This article will explore the question: can you apply Behr Premium Advanced DeckOver over paint?
Explore related products
What You'll Learn
- Behr DeckOver's performance can be affected by the amount of foot traffic and type of weather it is exposed to
- Behr DeckOver can be applied to wood and concrete surfaces, but not drivable surfaces
- Behr DeckOver is available in a range of colours, including a smooth and textured finish
- Behr DeckOver can be applied using a roller or brush, with different nap sizes for different finishes
- Behr DeckOver can fill cracks and conceal splinters, but it may peel and trap moisture
Behr DeckOver's performance can be affected by the amount of foot traffic and type of weather it is exposed to
Behr DeckOver is a coating that resurfaces existing wooden decks by filling in cracks and splinters, extending the life of the deck. It is recommended for exterior weathered or cracked horizontal and vertical wood and composite surfaces such as decks, railings, porches, and boat docks. It is also suitable for concrete surfaces like pool decks, patios, and sidewalks.
The performance of Behr DeckOver can be influenced by several factors, including foot traffic and weather conditions. It is crucial to allow sufficient dry time before allowing foot traffic on the coated surface. Behr recommends waiting for 24-48 hours for light foot traffic and 72 hours for the coating to fully cure. Premature heavy traffic can cause the coating to fail.
The amount of foot traffic a Behr DeckOver coating experiences can impact its durability. A review of the product on a high-traffic deck noted that the paint peeled up from the deck in sheets and showed wear from the treads on the steps. However, the same review noted that the railings, which experience less foot traffic, were holding up much better, with only a few spots where the paint was coming off.
Another review mentioned that dirty footprints were always showing up on the deck, requiring scrubbing to remove them. This suggests that foot traffic can impact the appearance of the coating and may require more frequent cleaning in high-traffic areas.
In terms of weather exposure, Behr DeckOver is recommended for use when air and surface temperatures are between 50-90˚ F (10-32˚ C). Applying the coating in direct sunlight or when rain is expected within 24 hours should be avoided.
Some reviewers have reported issues with the coating's performance in certain weather conditions. One review mentioned that the coating faded to a pink color in a few years due to full southern exposure. Another review from Georgia, where the weather is described as "brutal," noted that the coating peeled up from the deck in sheets and showed significant wear from foot traffic.
Overall, while Behr DeckOver can provide a beautiful and durable finish, its performance can be affected by the amount of foot traffic it experiences and the type of weather conditions it is exposed to. Proper surface preparation, following application instructions, and allowing adequate dry time are crucial for achieving long-lasting results.
How to Fix Tacky Paint with a Second Coat
You may want to see also
Explore related products
Behr DeckOver can be applied to wood and concrete surfaces, but not drivable surfaces
Behr DeckOver is a stain-blocking paint and primer that can be used on wood and concrete surfaces. It resurfaces exterior weathered or cracked horizontal and vertical wood and composite surfaces, such as decks, railings, porches, and boat docks. It can also be used on concrete surfaces like pool decks, patios, and sidewalks.
To prepare the wood surface, remove all loose wood fibers, peeling paint, or deteriorated coatings. Replace rotting or unstable boards and remove loose splinters. Remove mildew stains, dirt, oil, and grease with a product like BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper, followed by No. 63 All-In-One Wood Cleaner. Rinse thoroughly and allow the surface to dry before coating.
For concrete surfaces, avoid areas that are structurally weak or subject to hydrostatic pressure above 8 psi. Allow new surfaces to cure for 30 days. Use a stripper product to remove peeling coatings, and clean coated surfaces with BEHR No. 990 Concrete & Masonry Degreaser & Cleaner.
Behr DeckOver should not be used on drivable surfaces such as garage floors and driveways. It is important to follow the manufacturer's directions for proper preparation and application to achieve long-lasting results.
Some customers have complained about the product peeling off, trapping moisture, and rotting wood. Others have mentioned issues with dirty footprints always showing up on the deck. However, there are also positive reviews highlighting its durability, UV protection, and ability to fill cracks and conceal splinters.
Painted Toppers in Rocket League: A Comprehensive Guide
You may want to see also
Explore related products
Behr DeckOver is available in a range of colours, including a smooth and textured finish
Behr DeckOver is a premium wood stain and finish product that can be used to resurface existing wooden decks, filling in cracks and taming splinters. It is available in a range of colours and sheens, including flat, satin enamel, semi-gloss enamel, and hi-gloss enamel.
The flat sheen is non-reflective and easy to apply and touch up. It will also help to minimise the appearance of minor surface imperfections. The satin enamel sheen creates a pearl-like finish that is durable and dirt-resistant. It will also resist moisture, fading, and stains. The semi-gloss enamel sheen has a sleek and radiant appearance, with a durable finish that can withstand wear and tear and will resist moisture, fading, and stains. The hi-gloss enamel sheen has a shiny, glass-like finish that is durable and easy to wipe clean.
Behr DeckOver is available in over 1000 colours when tinted to colours from the BEHR DYNASTY™ & MARQUEE® Interior & Exterior One-Coat Hide Color Collection. This includes solid custom colours, as well as smooth and textured finishes. The smooth finish is ideal for a sleek and modern look, while the textured finish can add a slip-resistant coating to your deck.
It is important to note that Behr DeckOver should not be used on drivable surfaces such as garage floors and driveways. Additionally, proper surface preparation is key to achieving the best results, including removing all loose wood fibres, peeling paint, or deteriorated coatings prior to application.
Charging Glow-in-the-Dark Body Paint: Quick Tips
You may want to see also
Explore related products
Behr DeckOver can be applied using a roller or brush, with different nap sizes for different finishes
Behr DeckOver is a coating that resurfaces existing wooden decks by filling in cracks and concealing splinters, giving your deck a new look and extending its life. It is available in 54 solid custom colours and is great for decks, patios, composite decks, pool decks and walkways.
Before applying Behr DeckOver, it is important to properly prepare the surface. Remove all loose wood fibres, peeling paint/stain or deteriorated coatings using a stripper such as BEHR PREMIUM® Wood Stain & Finish Stripper. On new wood, use BEHR PREMIUM® No. 63 to remove mill glaze and open the pores of the wood. Rinse thoroughly and allow the surface to dry before coating. Concrete surfaces should be cleaned with an etcher product or a concrete and masonry degreaser. Avoid structurally weak areas or those subject to high hydrostatic pressure. Allow new surfaces to cure for 30 days.
When applying Behr DeckOver, pour the coating into a paint tray and work a roller into the tray until it is fully loaded. Apply a generous, even coat to the surface, using the roller to spread the coating evenly. For areas where the roller cannot reach, use a 2"-2 1/2" wide brush to cut in a 2"-3" wide area. Allow ample dry time before exposing the surface to foot traffic.
While Behr DeckOver can provide a new look to your deck and protect it from the elements, some users have reported issues with the product. Some reviews mention that the coating can peel off, especially in cold weather, and that it may not be effective in hiding footprints or dirt. It is important to consider the amount and type of foot traffic, severity of weather, and surface condition when using this product.
Safe Paint Disposal Guide for Columbia County, NY
You may want to see also
Explore related products
Behr DeckOver can fill cracks and conceal splinters, but it may peel and trap moisture
Behr DeckOver is a coating that can be applied to properly prepared exterior weathered or cracked horizontal and vertical wood, concrete, and composite surfaces. It is designed to fill cracks and conceal splinters, extending the life of your deck. The product is available in 54 solid custom colours and can be purchased at Home Depot.
To apply Behr DeckOver, you should first ensure that the surface is clean, sound, dry, and free of any dirt, oil, and grease. For wood surfaces, it is recommended to replace rotting or unstable boards and remove loose splinters. You can use a product like BEHR PREMIUM® Wood Stain & Finish Stripper to remove peeling paint or stain and then use BEHR PREMIUM® All-In-One Wood Cleaner to remove mildew stains and restore the wood's natural colour. Nail holes and cracks up to 1/4" can be filled with the DeckOver coating using a nylon/polyester brush, while deeper holes and cracks may require additional filling. After filling, allow the coating to dry before rolling. When rolling, use a generous, even coat, and apply the coating in sections to avoid lap marks.
While Behr DeckOver claims to fill cracks and conceal splinters, there are several reviews highlighting issues with the product. Some users have reported that the DeckOver coating peeled off their decks within a year of application, and in some cases, the wood became wet and rotted due to trapped moisture. Others have mentioned issues with dirty footprints always showing up on the deck, requiring frequent scrubbing. Therefore, while Behr DeckOver may fill cracks and conceal splinters, it is important to consider the potential issues highlighted by users' experiences.
To address the issue of peeling, it is crucial to properly prepare the surface before applying Behr DeckOver. This includes stripping away any peeling coatings and cleaning the surface with a suitable product, such as BEHR PREMIUM® No. 63 All-In-One Wood Cleaner. Additionally, ensuring that the surface is thoroughly dry before coating can help prevent peeling. However, despite proper preparation, some users have still experienced peeling, especially after a cold winter.
Overall, while Behr DeckOver may be effective at filling cracks and concealing splinters, it is important to be aware of the potential issues that have been reported by users, including peeling and trapped moisture. Proper surface preparation and following the manufacturer's directions are essential to achieving the best results.
Create Dreamy Paintings with These Simple Techniques
You may want to see also
Frequently asked questions
Behr Premium Advanced DeckOver is an advanced stain-blocking paint and primer that resurfaces existing wooden decks by filling in cracks and taming splinters. It is available in over 1000 colours and provides comprehensive all-climate protection.
Behr Premium Advanced DeckOver is suitable for properly prepared exterior weathered or cracked horizontal and vertical wood and composite surfaces such as decks, railings, porches, and boat docks. It can also be used on concrete surfaces such as pool decks, patios, and sidewalks. However, it should not be used on drivable surfaces such as garage floors and driveways.
To apply Behr Premium Advanced DeckOver, first ensure that the surface is clean, sound, dry, and free of any dirt, oil, and grease. Remove any peeling stains and wood finishes with a stripper such as BEHR PREMIUM® Wood Stain & Finish Stripper. Then, use a roller or brush to apply a generous, even coat of the DeckOver coating to the surface. Allow ample dry time before exposing the surface to foot traffic.
