Lena Rivera
Rust-Oleum Deck Restore is a water-based, low-odor product designed to mask wood grain and prevent it from showing. It is marketed as a thick paint product for wood decks that require restoration. While some users have praised the product for its durability and ability to fill in cracks, others have had poor experiences, with the product peeling and bubbling within a year of application. As for painting OSB with Rust-Oleum, it is recommended to prime the surface first, as OSB tends to absorb a lot of moisture, which can cause the paint to pucker and peel.
| Characteristics | Values |
|---|---|
| Effectiveness | Fills in cracks |
| Ease of application | Applied with Restore rollers, a type of polyester honeycomb roller |
| Drying time | 4 hours between coats, 48 hours to fully dry |
| Durability | Resistant to mould and mildew, lasts through snow, rain and sun |
| Safety | Water should be added to prevent the product from drying out too fast |
| Longevity | Rust-Oleum claims it will last 12 years, but some users report peeling within the first year |
| Cost | $30 per gallon |
| Priming | OSB should be primed first to prevent paint from being sucked up by the wood |
Explore related products
What You'll Learn
Priming OSB before painting with Rustoleum
Painting OSB with Rustoleum can be a great way to improve the quality of the wood and hide visible sections. However, it is important to prime the OSB before painting to ensure the best results.
OSB, or oriented strand board, is a type of engineered wood formed by compressing layers of wood strands with adhesives. It is a budget-friendly material often used for subflooring, sheathing, and construction projects. However, its rough and bumpy texture can make it challenging to paint, and it tends to absorb a lot of moisture.
To prime OSB before painting with Rustoleum, follow these steps:
- Clean and sand the surface: Use a vacuum cleaner with a handheld brush attachment to remove any dust and debris from the OSB surface. Then, use 120-grit sandpaper to sand the flat surfaces, creating a more uniform texture for the primer to adhere to. Avoid excessive sanding, especially on the edges, as it may compromise the durability of the board.
- Remove the wax layer: OSB has a moisture-resistant barrier that can hamper paint absorption. Use a suitable wood floor wax stripper to remove this wax layer and improve paint adhesion.
- Fill in gaps (optional): If you want a smooth finish and there are noticeable gaps or holes in the OSB, use a polyester resin filler like 3M Platinum Plus Filler. Apply it in thin layers, allowing each layer to dry before sanding it down flat again.
- Apply a primer: Choose a high-quality oil-based primer or an oil alkyd primer thinned with turpentine. The primer will seal the surface and prevent the paint from soaking into the OSB. Roll or brush on a coat of primer, ensuring even coverage.
- Let the primer dry: Allow the primer to dry completely before moving on to the painting stage.
By following these steps, you can effectively prime OSB before painting with Rustoleum, ensuring a smooth and durable finish. Keep in mind that while Rustoleum Deck Restore is a thick paint product for exterior wood, some users have reported issues with peeling and bubbling. Always follow the manufacturer's instructions and surface preparation guidelines for the best results.
How to Paint a Fiberglass-Finish Pool
You may want to see also
Explore related products
Rust-Oleum Deck Restore application process
Rust-Oleum Deck Restore is a water-based, low-odor product designed to mask the wood, preventing the wood grain from showing. It is a thick coating that fills gouges, cracks, and splinters while also hiding imperfections. The textured surface is slip-resistant.
The application process for Rust-Oleum Deck Restore involves the following steps:
- Prepare the deck surface by removing all flaking or peeling paint, sanding glossy surfaces, and removing any water sealer to ensure good adhesion.
- Apply the first coat of Deck Restore using Restore rollers, which are polyester honeycomb rollers designed to texture the surface of the deck boards. Roll it in the direction of the deck boards to fill in cracks and imperfections.
- Allow the first coat to dry for at least four hours. During this time, you can work on other areas like stairs or railings.
- Apply the second coat, ensuring to fill in any missed areas and use a garden hoe or similar tool to cut gaps between boards for clean lines.
- Let the deck completely dry for at least 48 hours before allowing foot traffic.
While the manufacturer claims that Rust-Oleum Deck Restore will last for 10-12 years, there have been numerous reports of premature failure, including bubbling, peeling, cracking, and flaking within a year to a year and a half of application. Some users have also experienced issues with the product not weathering well and chipping or cracking during the winter. Due to these issues, a class-action lawsuit was filed against Rust-Oleum, and the product has received overwhelmingly negative reviews from consumers.
Assembling Clock Hands on Diamond Paintings: A Step-by-Step Guide
You may want to see also
Explore related products
Rust-Oleum Deck Restore's performance
Rust-Oleum Deck Restore is a water-based, low-odor product designed to mask the wood, preventing the wood grain from showing. It is marketed as a thick paint product for wood decks outside of conventional restoration. The product is applied with Restore rollers, which are polyester honeycomb rollers designed to texture the surface of the deck boards. The textured surface is slip-resistant.
Rust-Oleum Deck Restore is advertised as a long-lasting product, with the company claiming it will last for 12 years. Some customers have been happy with the product, with one review stating that their deck "continues to look great" after a full year. The reviewer also noted that there were no issues with mold or mildew. Another reviewer praised the product for being slip-resistant, even when wet.
However, there have been several negative reviews and a class-action lawsuit against the product. Many customers have complained about significant peeling, bubbling, cracking, and flaking within a year to a year and a half of applying the product. Some reviewers have also noted that the product gets very thick and dries out quickly, requiring the addition of a small amount of water during application.
Overall, while some customers have had positive experiences with Rust-Oleum Deck Restore, there are also a considerable number of negative reviews and lawsuits against the product, indicating that its performance may vary depending on the specific circumstances of use.
Waterproofing Painted Surfaces: Is It Possible?
You may want to see also
Explore related products
Removing Rust-Oleum Deck Restore
Rust-Oleum Deck Restore is a water-based, low-odor product designed to mask the wood, preventing the wood grain from showing. While the manufacturer claims it will last 10 to 12 years, there have been several complaints about the product's durability. Many customers have experienced issues with bubbling, peeling, and cracking within a year to three years of application.
Due to the product's thickness and epoxy-like chemical composition, removing Rust-Oleum Deck Restore can be challenging and time-consuming. Here are some methods that have been suggested and tried by people:
- Power washing, scraping, and sanding: This method has been attempted by a customer, but they were unable to remove the product completely, and it resulted in more damage to the deck.
- Using a metal shovel: In some cases, a metal shovel can be used to remove large chunks of the product that have peeled off.
- Sanding: After removing the large chunks with a shovel, sanding can help smooth out the surface and remove any remaining traces of the Deck Restore.
- Back to Nature Multi-Strip: This chemical stripper is suggested by a professional painting contractor, but they are unsure of its effectiveness.
- Heat gun and a floor scraper: This method, suggested by the same contractor, involves using heat to soften the Deck Restore and then scraping it off.
- Angle grinder: This power tool can be used to grind away the product, but it may also damage the deck if not used carefully.
- Replacing the deck boards: In some cases, the only option may be to replace the deck boards entirely, especially if the previous application of Deck Restore was not properly prepared or maintained.
It is important to note that before attempting any removal method, it is crucial to test it on a small area first to ensure it does not cause further damage to the deck. Additionally, proper safety gear, such as gloves, eye protection, and a respirator, should be worn during the removal process to protect against chemicals and debris.
Wait Time for Painting Fresh Concrete
You may want to see also
Explore related products
Rust-Oleum Deck Restore customer reviews
Rust-Oleum Deck Restore is a water-based, low-odor product designed to mask the wood, preventing the wood grain from showing. It is marketed as a thick paint product for wood decks outside of conventional restoration.
There are mixed reviews for the Rust-Oleum Deck Restore product. Some customers claim that the product has started to bulge, crack, and peel within a year to a year and a half of applying the product. This has led to a class-action lawsuit against the product.
However, some customers have had a positive experience with the product. One customer claimed that their deck continues to look great a year after applying the product, with no mold or mildew issues. Another customer praised the product's non-slip surface and its ability to fill in cracks.
> "I applied Restore to my 10-year-old deck and was pleased by the appearance and non-slip surface after the job was completed. However, recently we noticed that the product has started to bulge up and crack. We followed the instructions for application as directed, but it looks like we will have to remove the bulges and re-apply."
>
> "I purchased 2 5-gallon buckets to do my large deck. I cleaned the deck with bleach water and a stiff brush, then pressure-washed it and let it dry. I had to get a 3rd bucket to finish the second coat. Now 5 months later, it is peeling off in long strips and the deck looks terrible. I am very disappointed as it is supposed to last 10 years."
>
> "I've had this applied to my deck for two years now and it still looks the same as the day I applied it. We have a pool, and the kids don't slip anymore. It has held up through snow, rain, and sun. I'm curious to see how it looks as the years pass."
Dispose of Unused Paint: A Step-by-Step Guide
You may want to see also
Frequently asked questions
Yes, you can paint OSB with Rust-Oleum Restore Deck. However, it is recommended to prime the surface first as OSB can absorb a lot of moisture and paint, causing "chips" that will need to be peeled off.
A recommended primer is an oil-alkyd primer thinned with turpentine. The turpentine will be absorbed into the wood particles, creating a strong bond.
Rust-Oleum states that a four-gallon pail covers about 100 square feet with two coats.
The deck needs about 48 hours to completely dry. However, it will be dry enough to walk on after four hours, and you can apply the second coat then.
Removing Rust-Oleum Restore Deck can be challenging. Some methods include using Back to Nature Multi-Strip, a heat gun with a floor scraper, a floor sander, or an angle grinder. Pouring boiling water on the paint will also cause it to peel off.
