Priya Kapoor
Tracker Jon boats are made of aluminum and are available in a variety of colours. While the paint on these boats can chip and peel, Tracker Boats offers a multi-layer powder coat finish called TRACKER® DIAMOND COAT™, which is harder and thicker than traditional liquid paint and keeps its colour for longer. However, some customers have reported issues with the paint on their Tracker boats, such as paint chipping and peeling. When repainting a Tracker Jon boat, owners have used various methods, including wire wheels, scrapers, and sandpaper, and have applied new paint using spray cans or guns.
Explore related products
![Jon Boat Cover Fit Tracker Grizzly 1754 Jon & Landau 1848/1748, 900D Marine Grade Polyester Canvas with PU Coating, 16-18ft Waterproof Boat Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61+HgiM-KPL._AC_UL320_.jpg)
![Jon Boat Cover Fit Tracker Grizzly 1648 Jon & Crestliner 1648M CR Jon, 900D Marine Grade Polyester Canvas with PU Coating, 14-16ft Waterproof Boat Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61mCPUkG9dL._AC_UL320_.jpg)
What You'll Learn
- Tracker Jon boats have had issues with paint in the past, with some users reporting paint chipping and peeling
- Some Tracker Jon boat owners opt to repaint their boats, with various methods and products recommended
- When repainting, it's important to prepare the surface properly, which may include sanding, wire wheeling, or using paint stripper?
- A variety of paint types can be used, including spray paint, self-etching paint, and aluminium boat paint
- Tracker Boats now offers a multi-layer powder-coat finish called DIAMOND COAT, which is harder and thicker than traditional liquid paint
Tracker Jon boats have had issues with paint in the past, with some users reporting paint chipping and peeling
DIAMOND COAT™ is a multi-layer powder coat finish that is said to be harder, thicker, and more durable than traditional liquid paint. It is applied through a robotic and automated process that includes a five-stage wash, electrostatic coating, and curing in an oven to bond the finish to the aluminum surface. This new finish is likely to address the paint issues experienced by some Tracker Jon boat owners.
In terms of paint issues, some owners of Tracker boats, including the 2005 model, have reported challenges in finding the exact paint color match for touch-ups and repairs. The grey-tan color, in particular, has been difficult to identify and match accurately. However, advancements in color-matching technology at auto paint stores now make it possible to find nearly identical paint matches by taking a picture of the boat's color.
It is important to note that proper surface preparation is critical before applying paint to a Tracker Jon boat or any other boat. This includes thoroughly cleaning and sanding the surface to create a smooth and flush finish. Additionally, the use of a suitable primer or sealer is essential to ensure the paint adheres well and withstands the marine environment.
Overall, while Tracker Jon boats may have experienced paint issues in the past, the introduction of the DIAMOND COAT™ finish and advancements in paint technology should help address these concerns. Boat owners can now access improved paint options and more accurate color-matching capabilities to maintain the appearance and durability of their vessels.
How to Apply Rhino Liner Over an Older Coat
You may want to see also
Explore related products
![Jon Boat Cover Fit Tracker Grizzly 1036 & 1236, 10ft-12ft Trailerable 900D Heavy Duty with PU Coating 100% Waterproof & UV-Resistant, All-Weather Protection [Motor Cover Included]](https://m.media-amazon.com/images/I/61xpc-9W32L._AC_UL320_.jpg)
![Jon Boat Cover Fit Tracker Grizzly 1036/1236 Jon, Crestliner 1032/1240 CR Jon, 900D Marine Grade Polyester Canvas with PU Coating, 10-12ft Waterproof Boat Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61inwwM1bvL._AC_UL320_.jpg)
Some Tracker Jon boat owners opt to repaint their boats, with various methods and products recommended
Tracker Jon boat owners sometimes opt to repaint their boats, often to change the colour or cover up fading. There are several methods and products recommended for repainting a Tracker Jon boat.
One source suggests using a wire wheel and oven cleaner to remove the existing paint, then using an airbrush to apply the new paint. Another recommends using a wire wheel on a grinder to strip the paint down to the bare metal, then applying a spray paint primer and light coats of spray paint. If you want to avoid wire wheels, you can use paint stripper and plastic scrapers to remove the paint, being careful not to gouge the aluminium.
If the existing paint is in good shape, you can paint over it. However, if the base coat isn't bonded well, the new paint will eventually flake off. It's important to pay attention to what you thin the paint with if you're using a spray gun, as the wrong thinner can result in a rough finish.
Some recommended products for repainting a Tracker Jon boat include self-etching paint from spray cans, Sherwin Williams Kem400 paint, and RedLeg camo paint and stencils for a camo pattern. If you're looking for an exact colour match, you can take your boat to an auto paint store, where they can use a digital camera to match the colour almost exactly.
Tracker Boats also offers their own multi-layer powder coat finish called TRACKER® DIAMOND COAT™, which is harder, thicker, and more durable than traditional liquid paint. This finish is applied through a five-stage process that includes automated washing, robotic coating, and curing in an oven to bond the finish to the aluminium surface.
Ancient Egyptian Art: Paint and Ink Origins
You may want to see also
Explore related products
![Jon Boat Cover Fit Tracker Grizzly 1648, Crestliner 1648M CR Jon, 900D Marine Grade Polyester Canvas with PU Coating, 14-16ft Waterproof Boat Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61IsxV0zmzL._AC_UL320_.jpg)
$799.99
![Jon Boat Cover Fit Tracker Grizzly 1436 & Lowe 1448MJ & G3 1436, 900D Marine Grade Polyester Canvas with PU Coating, 14ft Waterproof Boat Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61ltvtdS4-L._AC_UL320_.jpg)
When repainting, it's important to prepare the surface properly, which may include sanding, wire wheeling, or using paint stripper
Tracker boats are known for their multi-layer powder-coated finish, which is harder, thicker, and more durable than traditional liquid paint. While I cannot confirm if this powder coating is a one-component paint, I can provide information on preparing the surface of a boat for repainting.
When repainting, it is essential to prepare the surface properly to ensure the new paint adheres well and the finish is smooth and long-lasting. This process can include various methods, such as sanding, wire wheeling, or using paint strippers.
Sanding is a common technique to create a smooth and even surface before repainting. It is often done by hand or with an orbital sander, and the grit size of the sandpaper can vary depending on the project. For example, one source suggests using 40 grit sandpaper for sanding cabinets, while another recommends 100 or 120 grit for smaller items. After sanding, it is essential to wipe down the surface with a clean cloth or rag to remove any dust or debris.
Wire wheeling is another method to prepare a surface for repainting. It involves using a wire wheel or brush to remove old paint, rust, or corrosion. However, some sources advise against using rotating wire brushes as they can be ineffective at removing all dirt and corrosion, and they may not adequately prepare the surface for painting. Instead, a hand wire brush or a non-rotating wire brush can be used, followed by a clean hand steel brush and a clean rag.
Paint strippers can also be used to remove old paint and create a smooth surface for repainting. After using a paint stripper, it is essential to wipe down the surface to ensure no residue is left behind. Additionally, primers can be used to prepare the surface and improve the adhesion of the new paint. It is important to follow the instructions on the primer and allow adequate drying time before proceeding with the repainting.
Overall, proper surface preparation is key to achieving a high-quality and long-lasting paint finish. Depending on the project and the condition of the surface, one or a combination of these methods may be employed to ensure the surface is clean, rough, and ready for painting.
Precision Painting: Sphere Edition
You may want to see also
Explore related products
$63.99 $78.99
![Jon Boat Cover Fit Tracker Grizzly 1436 & Lowe 1436 & Crestliner 1448 CR Jon/ 1448M CR Jon, 900D Marine Grade Polyester with PU Coating, 14ft Waterproof Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61rKgDDSf-L._AC_UL320_.jpg)
![Jon Boat Cover Fit Tracker Grizzly 1436 & Landau 14' Jon Boat, 900D Marine Grade Polyester Canvas with PU Coating, 14ft Waterproof Boat Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61NLsZr+rPL._AC_UL320_.jpg)
A variety of paint types can be used, including spray paint, self-etching paint, and aluminium boat paint
Tracker Jon boats are made of aluminium. While I cannot confirm whether they are painted with one-component paint, I did find that Tracker boats use a multi-layer powder coating finish called TRACKER® DIAMOND COAT™. This coating is harder, thicker, and more durable than traditional liquid paint. It is also environmentally friendly.
When it comes to painting Jon boats, there are a variety of paint types that can be used, including spray paint, self-etching paint, and aluminium boat paint.
Spray paint is a convenient option, but it can be time-consuming and challenging to achieve an even coating. Using a paint roller or brush with a can of paint can help you achieve a consistent, thick, and even coating. Enamel paint, for example, is a tough option that can hold up well against normal wear and tear.
Self-etching paint, or primer, is another option for Jon boats. It can help prepare the surface and improve paint adhesion.
Aluminium boat paint is specifically designed for aluminium boats, so it is suitable for Tracker Jon boats. Rust-Oleum High-Performance Protective Enamel is one example of this type of paint.
When painting a Jon boat, it is important to properly prepare the surface by cleaning and removing any contaminants. This will ensure that the paint adheres well and lasts longer. Additionally, consider the finish you desire, as flat colours are often preferred over gloss or metallic finishes for the interior of boats.
Maximizing High-Quality Overlapping Details in Substance Painter
You may want to see also
Explore related products
Tracker Boats now offers a multi-layer powder-coat finish called DIAMOND COAT, which is harder and thicker than traditional liquid paint
Tracker Boats now offers a multi-layer powder-coat finish called Diamond Coat. This finish is harder and thicker than traditional liquid paint. It is applied to the fully unitized hull/stringer/transom assembly, which first goes through a five-stage automated wash to ensure adhesion. The assembly is then coated with the colour powder, either by robotic wands or by technicians for the areas the wands cannot reach. Finally, the coated hull enters a curing oven, where the finish becomes bonded on a molecular level to the aluminium surface.
Diamond Coat is not only harder and thicker than traditional liquid paint but also more durable, long-lasting, and environmentally friendly. It is said to be up to three times harder and four times thicker than traditional paint, and it keeps its colour up to 20 times longer. This multi-layer powder-coat finish is used on Tracker Boats' aluminium boats, which feature a fully unitized hull/transom/stringer system for strength and durability.
The unitized structure of the hull sides and running surface provides full support and thickness for strength and durability. Additionally, the robotically welded, box-beam transom is welded into the hull and the stringer system for solid outboard support. The use of robotic welding in the manufacturing process ensures consistent high-quality welds and a better-fitting system, contributing to the overall strength and performance of the boats.
While there is limited information specifically about the paint used on Tracker Jon boats, the Tracker Boats brand is known for its commitment to quality and durability. The brand collects feedback from thousands of owners through its Voice of the Customer system, continuously improving its boats. This feedback loop ensures that Tracker Boats can address any concerns or make enhancements to their boats, including the paint or finish used.
In terms of paint colour, some Tracker boat owners have sought to match the grey-tan colour of their 2005 boats, indicating that this may be a standard or popular colour for that model year.
Quickly Import Multiple Images into Paint with These Steps
You may want to see also
![Jon Boat Cover Fit Tracker Grizzly 1436 & Landau 14'Jon Boat, 900D Marine Grade Polyester Canvas with PU Coating, 14ft Waterproof Boat Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61oLj6270CL._AC_UL320_.jpg)
![Jon Boat Cover Fit Tracker Grizzly 1436, Sea Nymph 1448/Porta Bote Boats, 14ft Trailerable 900D Heavy Duty with PU Coating 100% Waterproof & UV-Resistant, All-Weather Protection [Motor Cover Included]](https://m.media-amazon.com/images/I/618uLi-0pLL._AC_UL320_.jpg)
![Jon Boat Cover Fit Tracker Grizzly 1436 & G3 1442, 900D Marine Grade Polyester Canvas with PU Coating, 14ft Waterproof Boat Cover & UV Resistant [Motor Cover Included]](https://m.media-amazon.com/images/I/61QBLi++rwL._AC_UL320_.jpg)
